Les débits ne sont pas au beau fixe actuellement :
iperf3 -c 62.210.156.7 -p 9222 -R
Connecting to host 62.210.156.7, port 9222
Reverse mode, remote host 62.210.156.7 is sending
[ 5] local *.*.*.* port 50862 connected to 62.210.156.7 port 9222
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 49.3 MBytes 413 Mbits/sec
[ 5] 1.00-2.00 sec 51.9 MBytes 435 Mbits/sec
[ 5] 2.00-3.00 sec 52.1 MBytes 437 Mbits/sec
[ 5] 3.00-4.00 sec 49.1 MBytes 412 Mbits/sec
[ 5] 4.00-5.00 sec 51.4 MBytes 431 Mbits/sec
[ 5] 5.00-6.00 sec 51.9 MBytes 435 Mbits/sec
[ 5] 6.00-7.00 sec 51.9 MBytes 436 Mbits/sec
[ 5] 7.00-8.00 sec 52.1 MBytes 437 Mbits/sec
[ 5] 8.00-9.00 sec 50.6 MBytes 425 Mbits/sec
[ 5] 9.00-10.00 sec 51.3 MBytes 431 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.04 sec 523 MBytes 437 Mbits/sec 84 sender
[ 5] 0.00-10.00 sec 512 MBytes 429 Mbits/sec receiver
iperf Done.
Chez moi sous Linux :
$ iperf3 -c 62.210.156.7 -p 9222 -R
Connecting to host 62.210.156.7, port 9222
Reverse mode, remote host 62.210.156.7 is sending
[ 5] local 192.168.1.134 port 50596 connected to 62.210.156.7 port 9222
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 71.5 MBytes 600 Mbits/sec
[ 5] 1.00-2.00 sec 69.1 MBytes 580 Mbits/sec
[ 5] 2.00-3.00 sec 69.5 MBytes 583 Mbits/sec
[ 5] 3.00-4.00 sec 71.1 MBytes 596 Mbits/sec
[ 5] 4.00-5.00 sec 66.1 MBytes 555 Mbits/sec
[ 5] 5.00-6.00 sec 70.5 MBytes 592 Mbits/sec
[ 5] 6.00-7.00 sec 68.3 MBytes 573 Mbits/sec
[ 5] 7.00-8.00 sec 73.5 MBytes 617 Mbits/sec
[ 5] 8.00-9.00 sec 70.2 MBytes 588 Mbits/sec
[ 5] 9.00-10.00 sec 72.3 MBytes 607 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.01 sec 713 MBytes 598 Mbits/sec 19588 sender
[ 5] 0.00-10.00 sec 702 MBytes 589 Mbits/sec receiver
iperf Done.
Le plus rigolo, c'est à travers un tunnel wireguard :
interface: wg0
public key: xxx
private key: (hidden)
listening port: xxx
fwmark: 0xca6c
peer: xxx
preshared key: (hidden)
endpoint: x.x.x.x:xx
allowed ips: 0.0.0.0/0, ::/0
latest handshake: 1 minute, 19 seconds ago
transfer: 1.33 GiB received, 14.69 MiB sent
ralph at zlinux in ~
$ iperf3 -c 62.210.156.7 -p 9222 -R
Connecting to host 62.210.156.7, port 9222
Reverse mode, remote host 62.210.156.7 is sending
[ 5] local 172.16.0.12 port 55318 connected to 62.210.156.7 port 9222
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.3 MBytes 757 Mbits/sec
[ 5] 1.00-2.00 sec 99.7 MBytes 836 Mbits/sec
[ 5] 2.00-3.00 sec 98.8 MBytes 829 Mbits/sec
[ 5] 3.00-4.00 sec 95.0 MBytes 797 Mbits/sec
[ 5] 4.00-5.00 sec 98.7 MBytes 828 Mbits/sec
[ 5] 5.00-6.00 sec 97.6 MBytes 818 Mbits/sec
[ 5] 6.00-7.00 sec 98.2 MBytes 824 Mbits/sec
[ 5] 7.00-8.00 sec 97.3 MBytes 816 Mbits/sec
[ 5] 8.00-9.00 sec 95.6 MBytes 802 Mbits/sec
[ 5] 9.00-10.00 sec 99.0 MBytes 831 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.01 sec 980 MBytes 822 Mbits/sec 57887 sender
[ 5] 0.00-10.00 sec 970 MBytes 814 Mbits/sec receiver
iperf Done.
ralph at zlinux in ~
$ sudo wg
interface: wg0
public key: xxx
private key: (hidden)
listening port: xxx
fwmark: 0xca6c
peer: xxxx
preshared key: (hidden)
endpoint: x.x.x.x:xx
allowed ips: 0.0.0.0/0, ::/0
latest handshake: 1 minute, 44 seconds ago
transfer: 2.34 GiB received, 20.06 MiB sent
J'ai bien 1Go qui est passé dans le tunnel . Après le peer iperf (62.210.156.7) semble proche en terme de réseau de mon endpoint ;)